Weigh Station Bypass Guide
Last updated February 12, 2025
Weigh Station Bypass must be requested to be enabled before you start receiving alerts on your Switchboard application. To learn how to enable Weigh Station Bypass, visit: https://support.onswitchboard.com/articles/236392-enabling-weigh-station-bypass
Skip the scales with Drivewyze PreClear. Cut down on fuel costs and keep your trucks moving.
- Real-time and essential alerts for commercial fleets across 2,600+ High Risk Areas across North America
- Includes unique state DOT sponsored dangerous and unexpected slowdown alerts & advisories
- Proven to work: 19% reduction in Hard Braking events prior to road congestion
There are 700+ participating sites for Weigh Station Bypass.
At these sites, you will receive 2-mile and 1-mile heads up alerts, indicated by a blue light & banner.
You will then receive one of three driving instructions:
- Bypass the site
- Pull in to the site
- Follow the roadside driving instructions
At sites not participating in the Drivewyze Program, you will receive the following notifications:
- 2-mile and 1-mile heads-up alerts indicated as Non-Drivewyze.
- You will then receive a driving instruction to Follow Road Signs.
If your fleet ahs opted into the Florida Ag bypass program, you may receive a conditional bypass.
Bypass unless hauling: refrigerated loads, agriculture, aquaculture, horticulture, or livestock.
You can select the clock icon to recall last driving instruction.
As a reminder: Please remember to turn your device soudn on, as Drivewyze provides audio alerts.
